Developed for dual drive electric skateboards, the Stormcore is among the most advanced and polished motor controllers available. It can control two independent brushless motors efficiently and asynchronously, delivering power as needed to propel you into adventure. Featuring an anodized CNC aluminum case, it is built sturdy to offer maximum durability and thermal performance. The rear portion of the case is a plastic composite to allow clean RF reception for the internal bluetooth module so you can connect to your board remotely for logging stats and tuning performance for advanced users (changing settings voids the warranty on your board).
The recommended maximum operating voltage is 50.4V / 84V (12S Li-Ion on 60D+ /18S Li-Ion on 100D). Sustained motor current will vary by application and environment but our testing has shown excellent thermal performance at settings up to 100 max motor amps per motor and the controller is capable of sustaining 80 motor amps for a period of several minutes without external cooling.
INTERNAL POWER SWITCH
An included switch with RGB LED controls an internal anti-spark switch to safely toggle power of your system. The internal anti-spark was designed for maximum reliability and longevity and testing has shown it to be extremely robust. When configured the switch also displays the current battery level of the board as a color output on a continuous gradient from red-blue-green for 0-50-100% battery remaining.
An XT90 port is cleverly nestled within the assembly to save precious space in the enclosure that would otherwise be needed for this high-power connector. The motor leads are 4mm Female Bullet Connectors. Mating bullets can be ordered from many online vendors (the part number you will need is GC4011-M). There are ports for hall sensors, motor temperature sensors, and communication busses for external devices. The JST PH 2mm connectors adhere to the standard outputs featured in most VESC based ESCs making it compatible with many external devices. It also features a USB C port for connecting and configuring via computer.
SOFTWARE AND FIRMWARE
Stormcore comes with full support for the Lacroix Software Platform which includes apps for iOS and Web. See your stats, track rides, and adjust settings right in a thoughtfully crafted, intuitive UI.
The firmware of the Stormcore is VESC™ based and is compatible with all third-party apps supporting the latest firmware, but we recommend using only the official VESC™ software hosted at https://www.vesc-project.com/
PLEASE READ CAREFULLY BEFORE PLACING AN ORDER;
All Stormcores™ are VESC based. It's advisable to read and understand the safety information, limited warranty statement, licensing, terms and conditions of VESC Tool which you must accept before using the tool to program any VESC based ESC. Learn more here; https://vesc-project.com/
We recommend you use the settings above as limits. Not all Projects can handle this much power, the e-tray needs to be very well heatsunk and we recommend you adjust your values according to your set up with these numbers as the upper limits. As we do use the Stormcore™ in our own boards, they have been stress tested over thousands of units. But just because they work for us does not mean it will be perfect for your setup; it's your responsibility to build a battery and hook it up to a sentinel and BMS according to the rules of the art, use proper heat sinks and cable management, understand the conditions of use and do the research on how to operate VESC based on our Stormcore™ limits.
As we do use the Stormcore™ in our own boards, they have been stress tested over thousands of units. But just because they work for us does not mean it will be perfect for your setup; it's your responsibility to build a battery and hook it up to a sentinel and BMS according to the rules of the art, use proper heat sinks and cable management, understand the conditions of use and do the research on how to operate VESC based on our Stormcore™ limits.